The holder is supplied with 2 lockable clips.
Heating element is 150 Watt suitable for 100-240 voltage.
The temperature is limited to 60°C.
Equipped with an on/off switch.
The holder is supplied with rubber feet.
Material: Stainless Steel
Dimensions: Height 420mm, Width 290mm, Depth 165mm
Diameter: Ø 9.5mm.
Cord length: 130cm.
Bucket in ‘cold’ condition (room temperature): approximately 25°C.
Ambient temperature: approximately 24°C.
When a full 3Kg Tub is placed on the heating element and the lever-action dispenser is installed,
it takes about 30 minutes before the values below are reached.
Top of the Nutella® 3Kg Tub: Approximately 26°C
Bottom of the Nutella® 3Kg Tub to 10cm above it: Approximately 53°C
So it is important to note that the entire content of the 3Kg Tub will not be heated.
After the Nutella® has reached the temperature of ± 53°C and is pumped 2 or 3 times the temperature of the Nutella® in the outlet pipe is about 38°C.
When not used, the temperature in the outlet pipe cools down to ± 27°C within 30 minutes, which does not cause any problems when warm Nutella® will be pumped again.